+91 8866188126 [email protected]

Microplacer blog

Learn PCBs, assembly and electronics manufacturing

Short, practical articles for engineers, makers and buyers — design tips, how things are made, and how to get better boards for less.

Illustration: Ordering PCBs and PCBA Online: A Step-by-Step WalkthroughOrdering & Cost

Featured

Ordering PCBs and PCBA Online: A Step-by-Step Walkthrough

A first-timer’s walkthrough of ordering PCBs and assembly online: instant pricing, uploading Gerbers, options, payment and what happens before delivery.

4 min read

Illustration: Controlled Impedance for First-Timers: Stack-up, Traces and What to Tell Your FabPCB Design

PCB Design

Controlled Impedance for First-Timers: Stack-up, Traces and What to Tell Your Fab

Adding USB, Ethernet, DDR or RF for the first time? Learn when impedance matters, what sets it, and how to write clear impedance notes for your fab.

15 Nov 2026 · 4 min read

Illustration: FR-4, Tg, Thickness and Copper Weight: The Four Numbers on Every PCB OrderPCB Manufacturing

PCB Manufacturing

FR-4, Tg, Thickness and Copper Weight: The Four Numbers on Every PCB Order

Material, Tg, thickness and copper weight decide how your board handles heat, current and connectors. Here is what each number means and when to move away from the defaults.

15 Nov 2026 · 5 min read

Illustration: Assembly-Ready Files: The Gerber, BOM and Pick-and-Place ChecklistPCB Assembly

PCB Assembly

Assembly-Ready Files: The Gerber, BOM and Pick-and-Place Checklist

A practical checklist for sending a complete, consistent PCBA package, so the instant price and the finished boards both match your design.

15 Nov 2026 · 5 min read

Illustration: MSL and ESD: 5 Component Handling Myths That Damage BoardsComponents

Components

MSL and ESD: 5 Component Handling Myths That Damage Boards

Moisture and static damage parts long before reflow, usually without a visible mark. Five common handling myths, the facts behind them and simple habits for small teams.

15 Nov 2026 · 5 min read

Illustration: AOI, X-ray, Flying Probe, ICT or Functional Test? Choosing the Right CheckQuality & Testing

Quality & Testing

AOI, X-ray, Flying Probe, ICT or Functional Test? Choosing the Right Check

Each inspection and test method sees some faults and misses others. Here is what AOI, X-ray, flying probe, ICT and functional test can really catch, and how to choose by volume and risk.

15 Nov 2026 · 5 min read

Illustration: 10 Ways to Lower Your PCB Cost Without Hurting QualityOrdering & Cost

Ordering & Cost

10 Ways to Lower Your PCB Cost Without Hurting Quality

Board size, layer count, standard options, simple drilling and smart quantity choices move your PCB price the most. Ten practical tips to pay less without cutting corners.

15 Nov 2026 · 5 min read

Illustration: Conformal Coating: Do You Need It, and Which Type?EMS & Product

EMS & Product

Conformal Coating: Do You Need It, and Which Type?

Humidity, dust and condensation quietly kill electronics. Here is how to tell if your board needs conformal coating, which chemistry to pick and the mistakes to avoid.

15 Nov 2026 · 4 min read

Illustration: Designing a Flex PCB That Bends Without Cracking: A ChecklistPCB Design

PCB Design

Designing a Flex PCB That Bends Without Cracking: A Checklist

Moving from rigid to flex? Most flex failures are mechanical. This checklist covers bend radius, routing in the bend, stiffeners, coverlay and when rigid-flex is worth it.

15 Nov 2026 · 5 min read

Illustration: HASL vs ENIG vs OSP: Which Surface Finish Should You Pick?PCB Manufacturing

PCB Manufacturing

HASL vs ENIG vs OSP: Which Surface Finish Should You Pick?

A practical decision guide to PCB surface finishes: match HASL, lead-free HASL, ENIG or OSP to your parts, budget and how long the boards will wait before assembly.

15 Nov 2026 · 5 min read

Illustration: Using BGA, QFN or 0201 Parts? What to Expect When You Order AssemblyPCB Assembly

PCB Assembly

Using BGA, QFN or 0201 Parts? What to Expect When You Order Assembly

Boards with hidden-joint and tiny parts go to engineering review instead of an instant price. Here is why, how to design pads, vias and finish for them, and how they are inspected.

15 Nov 2026 · 5 min read

Illustration: Your Part Just Went Obsolete: A Step-by-Step Rescue PlanComponents

Components

Your Part Just Went Obsolete: A Step-by-Step Rescue Plan

A key IC goes end-of-life just before production. Follow one engineer as she sorts alternates, compares datasheets, proves a replacement on real boards and stops it happening again.

15 Nov 2026 · 5 min read

Illustration: IPC Class 2 vs Class 3: What It Means and When You Need ItQuality & Testing

Quality & Testing

IPC Class 2 vs Class 3: What It Means and When You Need It

IPC classes decide how strictly your boards are judged. Learn what Class 1, 2 and 3 mean, how they change cost, and how to write the right one into your order.

15 Nov 2026 · 5 min read

Illustration: Reading your PCB quote: which options really change the priceOrdering & Cost

Ordering & Cost

Reading your PCB quote: which options really change the price

Layers, size, finish and a few special options drive most of a PCB price. Here is what matters, what barely matters, and three easy ways to pay less.

15 Nov 2026 · 4 min read

Illustration: From Working Prototype to Finished Product: Planning a Box BuildEMS & Product

EMS & Product

From Working Prototype to Finished Product: Planning a Box Build

A working PCBA is only halfway to a product. Follow a startup through enclosure, cabling, parts sourcing, documentation, testing and scaling with box build assembly.

15 Nov 2026 · 4 min read

Illustration: 9 DFM Mistakes That Hold Up Your First PCB OrderPCB Design

PCB Design

9 DFM Mistakes That Hold Up Your First PCB Order

Most engineering queries on a first PCB order come from a few avoidable design and file mistakes. Here are nine of them and a quick checklist to catch them before upload.

15 Nov 2026 · 5 min read

Illustration: Heavy Copper PCBs: 5 Myths About Current, Heat and Trace WidthPCB Manufacturing

PCB Manufacturing

Heavy Copper PCBs: 5 Myths About Current, Heat and Trace Width

Thicker copper, trace width calculators and thermal vias are often misunderstood. Five myths about high-current PCBs, and what really keeps power boards cool.

15 Nov 2026 · 5 min read

Illustration: PCB Panelization for Assembly: 7 Mistakes and How to Avoid ThemPCB Assembly

PCB Assembly

PCB Panelization for Assembly: 7 Mistakes and How to Avoid Them

Why PCB assembly is always done in panels, and seven common panel mistakes — from wrong V-score choices to parts near break lines — with a quick checklist to avoid them.

15 Nov 2026 · 5 min read

Illustration: Sourcing Electronic Components in India: A Practical Guide for Engineers and BuyersComponents

Components

Sourcing Electronic Components in India: A Practical Guide for Engineers and Buyers

Local stock or import? How to avoid counterfeit parts, search by part number, upload a BOM and check everything before you place a component order in India.

15 Nov 2026 · 5 min read

Illustration: What the Free Flying-Probe Test on Your Bare PCB Actually CatchesQuality & Testing

Quality & Testing

What the Free Flying-Probe Test on Your Bare PCB Actually Catches

Every bare PCB we supply is 100% flying-probe tested for opens and shorts. Here is what that test finds, what it cannot find, and how your files make it better.

15 Nov 2026 · 5 min read

Illustration: Cables, Harnesses and Enclosures: A Product Design ChecklistEMS & Product

EMS & Product

Cables, Harnesses and Enclosures: A Product Design Checklist

Turning a working board into a finished product? Plan wire harnesses, connectors, strain relief and enclosure fit early with this practical checklist.

15 Nov 2026 · 3 min read

Illustration: Through, Blind, Buried, Tented, Plugged: Vias Explained Without the JargonPCB Design

PCB Design

Through, Blind, Buried, Tented, Plugged: Vias Explained Without the Jargon

A plain-language tour of via types and covering options — through, blind, buried, microvia, tented, plugged, filled — and how to pick the simplest one your board actually needs.

15 Nov 2026 · 4 min read

Illustration: From Gerber to Doorstep: The Journey of Your PCBPCB Manufacturing

PCB Manufacturing

From Gerber to Doorstep: The Journey of Your PCB

Follow one PCB order from Gerber upload through engineering check, fabrication, free 100% electrical test and express delivery — and learn what you can do at each step to keep it moving.

15 Nov 2026 · 5 min read

Illustration: Solder Paste, Stencils and Reflow: A Beginner's Guide to SMT SolderingPCB Assembly

PCB Assembly

Solder Paste, Stencils and Reflow: A Beginner's Guide to SMT Soldering

How a surface-mount joint is really made — paste, stencil and oven — why many defects start at the printer, and what the stencil line in your assembly quote means.

15 Nov 2026 · 5 min read

Illustration: How to Write a BOM That Sources Cleanly the First TimeComponents

Components

How to Write a BOM That Sources Cleanly the First Time

Ambiguous BOM lines cause most component delays. Use full part numbers, list approved alternates, check lifecycle status and follow a simple column template.

15 Nov 2026 · 5 min read