EMS · Electronic components
Electronic components sourcing — we buy the parts, you build the product
Finding every resistor, chip and connector on your BOM takes time and invites mistakes. Send us your bill of materials and our team sources the parts for your PCB assembly, checks them and gets them ready for the line.
Get an instant quoteIn short
Component sourcing means Microplacer purchases the electronic parts listed in your BOM so they are ready when your boards are assembled. Choose full turnkey, partial, consigned or your recommended source. We buy from manufacturers and authorised distributors or sources you approve, and alternates are used only with your approval.
Last updated
- Supply options
- Full turnkey, partial, consigned, your source
- BOM formats
- .xlsx, .xls or .csv
- Alternates
- Only with your written approval
How does component sourcing work for PCB assembly?
Send your BOM with designator, quantity, value, package and part number, plus the number of boards. We quote the parts separately from the assembly, compare received parts with the order and the BOM line, and send any questions to you in writing before parts are bought.
Can I supply some of the parts myself?
Yes. Mark those lines as customer supplied in your BOM, pack and label them by designator, and we source the rest.
See how it works
We check every BOM line — part number, package and quantity — and flag anything unclear.
What is component sourcing?
Component sourcing means we purchase the electronic parts listed in your BOM so that they are ready when your boards are assembled. You do not have to deal with many suppliers, minimum order quantities and separate shipments.
Startups and product teams
Students and researchers
Manufacturers and OEMs
How sourcing works, step by step
- 1
You send your BOM
Share your bill of materials with designators, quantity per board, value, package and — most importantly — the manufacturer part number (MPN) for each line. Add the number of boards you need.Tip: See Preparing your files for a clean BOM format.
- 2
BOM review
Our team goes through each line: does the part number exist, does the package match the footprint, do the designators and quantities add up? Anything unclear — a missing MPN, a mismatch or a part that is hard to find — is listed and sent back to you as a question. - 3
Finding the parts
We look for each part at authorised distributors, or at the sources you recommend. If a part is out of stock, at end of life or very expensive, we suggest an alternate with the same form, fit and function.Tip: No substitution is ever made without your approval.
- 4
Your quotation
Components are quoted separately from the PCB and the assembly work, based on your BOM. Real purchase quantities can be higher than the BOM quantity because of minimum order quantities, reel sizes and a few spares for machine placement — the quotation shows this clearly. See the assembly quote FAQ. - 5
Purchase and incoming check
After your order and payment, we buy the parts. When they arrive, they are checked against the order: part number, package, quantity and labels. - 6
Kitting and assembly
Parts are kitted by BOM line and handed to the assembly line together with your bare PCBs. Read how PCB assembly works for what happens next.
Choose how parts are supplied
Every project is different. You can let us buy everything, supply everything yourself, or mix the two.
| Option | Who buys the parts | Good for |
|---|---|---|
| Full turnkey | Microplacer sources every part on the BOM. | Simplest start: one order and one point of contact for PCB, parts and assembly. |
| Partial (mixed) | We source most parts; you send the special ones (e.g. a custom module or a part you already stock). | Projects with a few hard-to-get or customer-specific parts. |
| Consigned / kitted | You supply all components; we assemble them. | When you already hold stock or must use a specific source. |
| Your recommended source | We buy from the supplier or channel you name. | When you need control over specific parts or suppliers. |
Supplying your own parts?
What to send us
| Item | Why it matters | Required? |
|---|---|---|
| BOM (.xlsx / .xls / .csv) | The list we buy from: designator, quantity, value, package, MPN. | Yes |
| Number of boards | Sets the purchase quantity for each line. | Yes |
| Approved alternates | Lines where an equivalent part is acceptable (or where it is not). | Recommended |
| DNP list | Parts that should not be bought or placed. | If any |
| Preferred sources or parts you will supply | So we only buy what you need. | If any |
| Gerber and pick-and-place files | Needed when we also make and assemble the boards. | For assembly |
Ordering PCBs with assembly? Start with the instant quote above — the PCB and assembly price appear online and the parts are quoted from your BOM. Need only components, or a large or unusual BOM? Tell us your requirement and we quote after review.
Quality and genuine parts
Wrong or fake parts are one of the most common reasons for a failed board. These are the rules we follow.
Authorised sources first
Alternates only with approval
Incoming checks
Careful handling
Lifecycle awareness
Clear records
For our quality approach and certificates, see quality standards.
Frequently asked questions
Explore our EMS services
PCB fabrication
PCB assembly
Electronic components
Turnkey PCB
Box build assembly
Conformal coating
Wire harness
Certifications & standards
Product design & development
Import services
Related questions
Learn more — answers to the questions people ask next.
- How does component sourcing work?Component sourcing at Microplacer
- Can parts be sourced from outside India?Global component sourcing
- How do I write a BOM that sources cleanly?BOM alternates, lifecycle and obsolescence
- How should moisture- and static-sensitive parts be handled?MSL, ESD and component handling
- Can one order cover PCB, parts and assembly?Turnkey PCB service
- How is the assembly price calculated?Assembly quote FAQ: pads, stencil and components
- Which files do I need to send?Preparing Gerber, BOM and pick-and-place files
Related guides
Still have a question?
Send us your files or call us — our engineers will help you choose the right options for your boards and assembly.
Streamline your innovation with
seamless PCB ordering.