File preparation guide
Preparing your Gerber, BOM and pick-and-place files
Correct files are the fastest way to an accurate price and on-time boards. Here is what each file must contain and where to find the export in the common design tools.
Get an instant quoteWhich files for which job?
| File | Bare PCB | PCB + assembly |
|---|---|---|
| Gerber files (RS-274X) + drill files (Excellon), zipped | Required | Required |
| BOM (bill of materials) | — | Required |
| Pick-and-place (centroid / CPL / XY) file | — | Required |
| 3D model (STEP) | — | If available |
| Assembly drawing / notes (DNP, coating, programming) | — | Recommended |
1. Gerber and drill files
One Gerber file per layer, plus the drill files. Put them all in a single .zip or .rar.
Copper layers
Top, bottom and every inner layer (for 4+ layer boards).
Solder mask
Top and bottom mask openings.
Silkscreen
Top and bottom legend (text, outlines, polarity marks).
Solder paste
Top and bottom paste layers — needed for the assembly stencil and for counting SMD pads.
Board outline
Edge cuts / mechanical / keep-out outline — one closed shape.
Drill files
Excellon drill files for plated and non-plated holes (and slots).
| Design tool | Where to export |
|---|---|
| KiCad | PCB Editor → File → Fabrication Outputs → Gerbers (.gbr), then “Generate Drill Files”. |
| Altium Designer | File → Fabrication Outputs → Gerber Files and NC Drill Files. |
| EasyEDA | Fabrication → PCB Fabrication File (Gerber) → Download Gerber. |
| Eagle / Fusion Electronics | Use the CAM processor with a Gerber job (or the manufacturing export) and include drill files. |
2. BOM — bill of materials
A spreadsheet (.xlsx, .xls or .csv) with one line per part type.
| Column | Example | Why |
|---|---|---|
| Designator(s) | R1, R2, R7 | Must match the silkscreen and the pick-and-place file exactly. |
| Quantity per board | 3 | Used to order the right number of parts. |
| Value / description | 10k 1% 0.1W | Helps us check the part. |
| Package / footprint | 0603 | Must match the footprint on the board. |
| Manufacturer | YAGEO | For sourcing. |
| Manufacturer part number (MPN) | RC0603FR-0710KL | The most important column — avoids wrong parts. |
| DNP / do not place | DNP | Parts that must not be fitted. |
Designator,Qty,Value,Package,Manufacturer,MPN,Note R1 R2 R7,3,10k 1%,0603,YAGEO,RC0603FR-0710KL, C4,1,100nF 50V X7R,0603,Samsung,CL10B104KB8NNNC, U1,1,NE555,SOIC-8,TI,NE555DR, J2,1,Header 1x4,THT 2.54mm,,,DNP
3. Pick-and-place (centroid) file
Tells the placement machine where each SMD part sits.
| Column | Meaning |
|---|---|
| Designator | Same as in the BOM (R1, C4, U1…). |
| Mid X / Mid Y | Centre of the part, in mm (state the unit) from the board origin. |
| Rotation | Angle in degrees. |
| Layer / side | Top or Bottom. |
Designator,Mid X,Mid Y,Rotation,Layer R1,12.70mm,8.89mm,90,Top C4,15.24mm,8.89mm,0,Top U1,25.40mm,20.32mm,180,Top
| Design tool | Where to export |
|---|---|
| KiCad | PCB Editor → File → Fabrication Outputs → Component Placement (.pos), CSV, mm, both sides in one file. |
| Altium Designer | File → Assembly Outputs → Generates pick and place files (CSV). |
| EasyEDA | Fabrication → BOM and Pick and Place File. |
| Eagle / Fusion Electronics | Run a mount/centroid ULP (e.g. mountsmd) or the manufacturing export. |
Checklist before you upload
For every order
- All layers + drill files in one .zip / .rar
- Board outline included and closed
- Layer count in the quote = layers in the files
- Files exported from the final revision
Extra for assembly
- Paste layers included (top / bottom)
- BOM designators = pick-and-place designators = silkscreen
- MPN for every part; DNP parts marked
- Polarity and pin 1 visible on the silkscreen
- BGA / LGA or 0201 parts mentioned — these are reviewed by our engineers
Related questions
Learn more — answers to the questions people ask next.
- Which design rules must my PCB follow?PCB design rules and DFM checklist
- How do I design a board that is easy to assemble?Design for assembly: fiducials, spacing and stencils
- How do I write a BOM that sources cleanly?BOM alternates, lifecycle and obsolescence
- How do I order bare PCBs?PCB fabrication service
- How do I order PCB assembly?PCB assembly service
- How is the assembly price calculated?Assembly quote FAQ: pads, stencil and components
Related guides
Still have a question?
Send us your files or call us — our engineers will help you choose the right options for your boards and assembly.
Streamline your innovation with
seamless PCB ordering.