EMS · Box build
Box build & system integration — from loose boards to a finished product
Box build means taking your assembled PCBs and turning them into a complete unit: fitted in the enclosure, wired, fastened, labelled, tested and packed. This page explains what the service covers, how the work flows and what we need from you to quote it.
Get an instant quoteSee how it works
Your assembled PCBA is placed into its enclosure and seated on the mounting points.
What is box build?
A bare PCB, or even an assembled PCB, is rarely the thing your customer buys. They buy a device — a controller, a meter, a charger, a gateway. Box build is the step that closes that gap.
Board-in-a-box
Sub-assembly integration
Complete product
Who is it for?
How a box build project runs
Every product is different, so the exact steps follow your drawings and instructions. A typical flow looks like this:
- 1
You share the product pack
Assembly drawings or 3D models, the bill of materials for the whole unit (boards, enclosure, cables, screws, labels, packing), wiring diagrams and any test instructions.Tip: Send these through Contact us — box build is quoted by our team after review, not online.
- 2
Engineering review and quotation
Our team goes through the drawings and BOM, asks about anything unclear (part alternatives, cable lengths, torque or label details) and sends you a quotation for the build. - 3
PCB, assembly and parts
The PCBs are made and assembled, and the other parts of the unit are sourced or received from you. Read more about component sourcing. - 4
Mechanical fitting
Boards, panels, displays and power modules are fitted into the enclosure using the hardware and positions given in your assembly drawing. - 5
Wiring and cable routing
Internal cables and harnesses are connected and routed as per your drawing, so they do not rub, pinch or block airflow. If you need custom cables made, tell us the requirement — see wire harness. - 6
Programming, labelling and checks
Firmware is loaded if you provide it and it is agreed in the quotation, labels and serial numbers are applied as specified, and the unit is checked against your test instructions. - 7
Packing and dispatch
Finished units are packed in the way you specify — with or without accessories and manuals — and shipped to the address you give us.
What can be included
Pick what your product needs. We confirm the scope with you during the review.
| Item | What it means | Typical input from you |
|---|---|---|
| PCB fabrication & assembly | The electronics at the heart of the unit. | Gerber, BOM, pick-and-place file |
| Enclosure & mechanical parts | Housing, brackets, standoffs, screws, front panels. | Drawings / 3D model, part list or supplier details |
| Cables & harnesses | Internal wiring between boards, panels and power. | Wiring diagram, cable lengths, connector part numbers |
| Displays, keypads, power modules | Bought-in sub-assemblies fitted into the unit. | Part numbers or supplied parts |
| Firmware loading | Programming the microcontroller or module. | Firmware file and programming steps |
| Conformal coating | Protective layer on boards for harsh environments. | Coating areas and keep-outs — see conformal coating |
| Labels & serial numbers | Product, rating and serial labels; barcodes. | Label artwork and placement |
| Functional check | Power-up and checks as per your procedure. | Test instructions, pass/fail limits, any test jig |
| Packing | Unit packing, accessories, manuals, cartons. | Packing instructions |
What to send us to get a quote
- 1
Product overview
A short description, photos of a sample or prototype if you have one, and the quantity you need. - 2
PCB files
Gerber, BOM and pick-and-place file for every board. See preparing your files. - 3
Mechanical and wiring data
Assembly drawing or 3D model (STEP), full BOM of the unit, wiring diagram and cable details. - 4
Test and packing instructions
How the unit should be checked, what counts as a pass, and how it should be labelled and packed.
Tell us your requirement
Quality & checks
A finished product is only as good as its weakest step, so checks run through the whole build.
Files checked first
Tested bare boards
Build to your drawing
Your test procedure
Workmanship standards
Safe packing
Box build FAQ
Explore our EMS services
PCB fabrication
PCB assembly
Electronic components
Turnkey PCB
Box build
Conformal coating
Wire harness
Certifications & standards
Product design & development
Import services
Related questions
Learn more — answers to the questions people ask next.
- How do I order PCB assembly?PCB assembly service
- How are assembled boards inspected and tested?PCBA testing: AOI, X-ray, flying probe and ICT
- What do ISO, IPC and RoHS mean for my product?Certifications and standards explained
- What does an EMS partner do?Electronics manufacturing services (EMS) overview
- Which quality checks and standards apply?Quality standards
Related guides
Still have a question?
Send us your files or call us — our engineers will help you choose the right options for your boards and assembly.
Streamline your innovation with
seamless PCB ordering.