+91 8866188126 [email protected]

Glossary

PCB and PCB assembly terms, explained simply

The words you see in the quote and on our capability pages — in plain language.

Get an instant quote

Board and materials

FR-4
The standard glass-epoxy board material used in most electronics.
TG (glass transition temperature)
The temperature where the laminate starts to soften. Higher TG (e.g. TG155–170) handles more heat — useful for thick multilayer boards and lead-free assembly.
Flex PCB
A bendable board made of polyimide film, for parts that must fold or move.
Layers
Number of copper layers. 1–2 layers for simple boards; 4+ layers add inner ground and power planes.
Copper weight (oz)
Copper thickness. 1 oz ≈ 35 µm; heavier copper carries more current.
Board thickness
Finished thickness of the PCB; 1.6 mm is standard.

Surface and printing

Solder mask
The coloured coating over the copper that protects it and stops solder from bridging between pads.
Silkscreen (legend)
The printed text and outlines: designators, polarity marks, logos.
HASL
Hot Air Solder Levelling — pads coated with solder. Economical and easy to solder. Available with lead or lead-free.
ENIG
Electroless Nickel Immersion Gold — a flat gold finish, best for fine-pitch and BGA parts.
OSP
Organic Solderability Preservative — a thin flat organic coating; shorter shelf life.
Gold fingers
Hard-gold plated edge contacts that plug into a slot connector.

Holes and vias

Via
A small plated hole that connects copper layers.
Tented via
A via covered by solder mask (standard).
Plated through-hole (PTH)
A copper-plated hole for a leaded component pin.
Castellated holes
Half-holes plated along the board edge, so the board can be soldered onto another board like a module.
Drill file (Excellon)
The file that tells the machine where and what size to drill.

Panels

Panel (array)
Several boards joined into one larger board so machines can handle them. Required for assembly.
V-cut (V-score)
A V-shaped groove cut on both sides between boards so they can be snapped apart.
Tab routing / mouse bites
Boards milled out and held by small perforated tabs — for non-rectangular outlines.
Rails (edge rails)
Extra strips along the panel edge for the conveyor to hold and for fiducials.
Fiducial
A small round copper mark the placement machine uses to align the panel precisely.

Assembly

PCBA
Printed Circuit Board Assembly — a PCB with components soldered on.
SMD / SMT
Surface-mount device / technology: parts soldered on pads on the surface, without holes.
THT
Through-hole technology: parts with leads inserted through holes and soldered.
Solder pad
The copper area a component lead or terminal is soldered to. Our assembly price is based on pads per board.
BGA / LGA
Ball/Land Grid Array — ICs with connections underneath the package; joints are hidden and need special inspection.
0201
A very small chip size (0.6 × 0.3 mm). 0201 and smaller parts need extra process care.
Fine pitch
Very small spacing between IC pins (e.g. 0.5 mm or less).
Stencil
A thin metal sheet with openings at the SMD pads, used to print solder paste.
Solder paste
Tiny solder balls in flux, printed on SMD pads before placement.
Pick-and-place
The machine that places SMD parts — and the file with each part’s X/Y position and rotation.
Reflow soldering
Heating the board in an oven so the paste melts and forms solder joints.
Wave / selective soldering
Soldering through-hole parts with a wave or point of molten solder.
BOM
Bill of materials — the list of all parts with designators, values and part numbers.
DNP
Do not place — a part on the design that must not be fitted.
Consigned parts
Components that you supply to us for assembly.
DFM
Design for manufacturing — checking a design can be produced reliably before production.
AOI
Automated optical inspection — cameras check placement and solder joints.

Related guides

Still have a question?

Send us your files or call us — our engineers will help you choose the right options for your boards and assembly.

Streamline your innovation with seamless PCB ordering.

For More Details Contact Us